< Previous28 Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media FILTER MEDIA PRODUCT SPECIFICATIONS LIQUID FILTER BAG COMPONENTS & SPECIFICATIONS S ER IE S ACCUFIT ® SuperBond ® IP ACCUFIT Expanded Media UL TRAFIT ® 10 0 IP UL TRAFIT 5 00 IP UL TRAFIT 5 00 EXP UL TRAFIT 8 00 IP UL TRAFIT 8 00 EXP UL TRAFIT -NYLON IP UL TRAFIT -NYLON EXP UL TRAFIT AMT UL TRAFIT T est Bag Thermally Bonded Continuous Filament•••••••••• Laminated Monofilament Layers, Polypropylene or Nylon• Meltblown Microfiber, Polypropylene (P) or Nylon (N)PPPPPNNPP Graded-Density, Composite Layer Design Technology™•••••• IP-Integrated Polymeric Support ® •••••••••• Sieve Layer•••••••••• FDA Compliant Materials••••••••••• Zero-Bypass® Bag Collar with Dual Lift-Out Handles••••••••••• Efficiency Rating Nominal Nominal97%99%99%99.98% 99.98% 99.9%99.9% 99.98%99% Maximum Temperature (deg. F) 180°(P) 340°(N) 180°(P) 340°(N) 180°180°180°180°180°340°340°180°180° Available Sizes 1,2 3,4,5 1,2,4,5 1,2,4,51,21,21,2,4,5 1,2,4,51,21,21,22 MICRON RATING AVAILABILITY MICRON RATING.2.4.6.8<11251020254050100 200 400 600 NOMINALLY RATED FILTER BAGS ACCUFIT ® SuperBond®IP•••••• ACCUFIT Expanded Media••••••••••••• ABSOLUTE RATED, HIGH PERFORMANCE FILTER BAGS ULTRAFIT ® 100 IP •••••••• ULTRAFIT 500 IP •••••• ULTRAFIT 500 EXP• ULTRAFIT 800 IP••• ULTRAFIT 800 EXP • ULTRAFIT-NYLONIP••••• ULTRAFIT-NYLON EXP• ULTRAFIT AMT ••••• LARGE DIAMETER DROP-IN CARTRIDGE FILTER APX HIGH-CAPACITY ELEMENT•••••••Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media 29 WARNING Important Note on Chemical Compatibility: The information presented in this table is based on exposure at room temperature and is for general guidance only. In most cases, the use of specific filtering material, such as polypropylene, nylon, or cellulose, can be safely recommended without special testing. However, since many factors can affect the chemical resistance of a given product, the user under actual on-site operating conditions must determine filter bag compatibility. Factors such as degree of concentration of a substance in a fluid, temperature, and duration of exposure should be considered, as they may compromise the structural integrity and performance of the filter media. MAXIMUM FLOW RATES gpm (water) FILTER BAG SIZE P2P1P4P5 ACCUFIT ® SuperBond®IP907535 ACCUFIT Expanded Media1207540 ULTRAFIT ® 100 IP 604516 ULTRAFIT 500 IP3015–– ULTRAFIT 500 EXP 4030–– ULTRAFIT 800 IP2012610 ULTRAFIT 800 EXP 15836 ULTRAFIT-NYLONIP4025–– ULTRAFIT-NYLON EXP2515–– ULTRAFIT AMT2312610 APX HIGH-CAPACITY ELEMENT ELEMENT SIZE 728412422 902030 MAXIMUM DIFFERENTIAL PRESSURE (psig) Initial Pressure plus… FILTER BAG SIZE P2P1P4P5 ACCUFIT ® SuperBond®IP30303030 ACCUFIT Expanded Media35353535 ULTRAFIT ® 100 IP 34343434 ULTRAFIT 500 IP3434–– ULTRAFIT 500 EXP 3434–– ULTRAFIT 800 IP30303030 ULTRAFIT 800 EXP 30303030 ULTRAFIT-NYLONIP2424–– ULTRAFIT-NYLON EXP3434–– ULTRAFIT AMT30303030 APX HIGH-CAPACITY ELEMENT ELEMENT SIZE 728412422 353535 GENERAL CHEMICAL COMPATIBILITY OF POLYPROPYLENE AND NYLON CLASSIFICATIONTYPICAL EXAMPLESPOLYPROPYLENENYLON BASES (ALKALIES) Amines, Ammonium Hydroxide, Potassium Hydroxide, Sodium HydroxideGenerally CompatibleTesting Recommended BRINESCalcium Chloride, Potassium Chloride, Sodium Bromide, Sodium ChlorideGenerally CompatibleGenerally Compatible INORGANIC ACIDSBoric, Dilute Nitric, Dilute Sulfuric, Hydrochloric, PhosphoricGenerally CompatibleTesting Recommended ORGANIC SOLVENTS Alcohols, Amides Cellosolves, Esters, Esthers, Glycols, KetonesTesting RecommendedGenerally Compatible Aromatics (Benzene, Toluenes, Xylenes)Not RecommendedGenerally Compatible Petroleum Products (Aviation Gasoline, Diesel Fuel, Kerosene)Not RecommendedGenerally Compatible Hydrocarbons (Fats, Hexane, Octane, Oils, Petroleum Ether)Testing RecommendedGenerally Compatible Halogenated Hydrocarbons (Methylene Chloride, Perchloroethylene)Testing RecommendedTesting Recommended SALT SOLUTIONS Aluminum Chloride, Sodium Nitrate, Sodium SulfateGenerally CompatibleGenerally Compatible WATERAmbient (Nylon is not recommended for hot water)Generally CompatibleGenerally Compatible Maximum temperature limits for any fluid. Requires evaluation on an individual basis.180° F340° F30 Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media CUSTOMER SUPPORT STANDARD TERMS & CONDITIONS OF SALE Domestic Payment Terms Open Account Terms are NET 30 DAYS, after credit approval. Until credit has been established, terms are payment by credit card, or advance payment. We accept Master Card, VISA and American Express. Accounts are considered delinquent 30 days after due date, and are subject to suspension and collection. If this should occur, the buyer will be responsible for all collection costs, filing fees, and attorney’s fees. Venue for such action shall be in Broward County, Florida. Filtration Systems reserves the right to limit or extend credit. All pricing is in U.S. Dollars, payable in U.S. Funds on a U.S. bank. Sales and shipments within the State of Florida will be subject to Florida Sales Tax. A valid Certificate of Resale must be furnished if no sales tax is to be collected. International Sales and Terms International Orders must be paid IN ADVANCE by Credit Card or T/T Wire. Irrevocable Letters of Credit (L/C) are not accepted. Export order processing or production will commence upon receipt of funds. All shipping arrangements should be made by the buyer, and orders will be shipped FREIGHT COLLECT, via buyer’s Freight Forwarder. All International/Export orders will be subject to an export processing fee (one per shipment). Fee determined by required documentation, courier charges and packaging requirements. All duties, taxes, documentation and bank charges are the responsibility of the buyer. Order and Shipment Policies All Purchase Orders must be submitted in writing prior to processing and shipping. Orders can be faxed to 954-572-3401, mailed, or emailed to FSorders@FiltSys.com Minimum Order Requirements 1 Minimum order quantity for Filter Bags is one case (consult factory). 2 For all other items, minimum order is $100.00. Custom Orders Please consult factory for custom items and/or modifications. Payment for custom items or modified equipment may be required prior to fabrication. CUSTOM ITEMS OR MODIFIED EQUIPMENT ARE NOT RETURNABLE. Freight Terms All shipments are FOB Plant, Sunrise, Florida, USA. All shipping charges are the responsibility of the buyer. Orders can only be drop shipped within the Continental United States, and Hawaii. Filtration Systems will NOT prepay airfreight charges. Air shipments will be sent FREIGHT COLLECT. Please provide account number (FedEx, UPS, etc.) to bill airfreight charges. Merchandise Returns Filter Bags, Cartridge Filters, Baskets, O-Rings, HALAR Coated Vessels and Accessories, Epoxy Coated Vessels and Custom Items or Modified Equipment are NOT returnable. Authorization and the issuance of an RGA Number (Return Goods Authorization Number) MUST be obtained before returning any merchandise. Returned goods are to be shipped freight prepaid and are subject to a 30% restocking charge. Outside of carton MUST be labeled with our RGA number. Any item returned without an RGA number or sent with incorrect freight classification number will be refused.Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media 31 WARRANTY / LIMITATION OF LIABILITY Warranty Filtration Systems warrants its products to be free from defects in workmanship for a period of one year from the date of purchase, when used in accordance with our specific guidelines. Our only obligation and a customer’s remedy, subject to our inspection and evaluation, shall be to replace the product or refund the purchase price. Limitation of Liability Filtration Systems shall not be held responsible or liable for any loss resulting from the resale, direct or indirect misuse, incidental or consequential damages, arising out of the use of this product. Not all questions or issues may have been addressed in this manual. If you require any additional assistance or technical information, please contact our Customer Service Department. Lethal Service Filtration Systems vessels are not designed for lethal service. “Lethal Service” refers to vessels containing lethal substances, poisonous gases or liquids of such a nature that a very small amount of the gas or vapor of the liquid (mixed or unmixed) is dangerous to life when inhaled. In addition, substances of this nature that are stored under pressure, or may generate pressure if stored in a closed vessel, are considered lethal. Product Identification All Filtration Systems filter vessels have a unique serial number that can be identified by our factory. Nameplates, specifying both the serial number and maximum allowable pressure and temperature rating are permanently affixed to all housings. Removal of the nameplate voids the product of any warranty and eliminates future identification of the product. PRODUCT SPECIFICATIONS / INTELLECTUAL PROPERTY Product Specifications With over 50 years of industry expertise and proven performance, Filtration Systems offers quality products at responsible prices. We continually strive to improve our products through ongoing research and development; therefore, we reserve the right to change specifications without notice. Intellectual Property Filtration Systems products offer exclusive manufacturing technology. Our company is committed to protecting its patents, trademarks, and proprietary rights from those who would wrongfully use them. Partial Listing of Registered Trademarks of Mechanical Manufacturing Corporation Over-The-Top® SAFEsystem® Common Drain Manifold – CDM™ Dual Valve Linkage Mechanism – DVLM™ Bullet Bottom® Basket Accufit® Welded Liquid Filter Bags Accufit® Welded SuperBond® Ultrafit® Welded Liquid Filter Bags APX® High-Capacity Elements IP Integrated Polymeric Support® EXP® Series Composite Layer Design Technology™ ELC® Engineered Laminate Composite AMT–Antimicrobial Technology™ TruSeam™ Technology Zero-Bypass® Collar PurSeal® Collar Other Trademarks Halar® is a registered Trademark of Solvay Aflas® is a registered Trademark of Asahi Glass Co. Ltd. Neoprene®, Teflon®, and Viton® are Registered Trademarks of E.I. Dupont Company32 Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media FILTRATION SYSTEMS LIQUID FILTER HOUSINGS MODEL NUMBER CODING SYSTEM SPARE PARTS MAY BE ORDERED FROM YOUR DISTRIBUTOR OR: Filtration Systems Division of Mechanical Mfg. Corp. 10304 NW 50th Street Sunrise, FL 33351 Phone: 954-572-2700 Fax: 954-572-3401 www.filtrationsystems.comThe cornerstone of Filtration Systems philosophy is Customer Satisfaction. Our commitment extends to product quality, prompt delivery, and system recommendation. We serve the following industries and their distributors: • Chemical & Petrochemical Processing • Pharmaceutical, Cosmetic & Biotechnology Processing • Water Treatment, Purification & Reclamation • Food, Beverage & Fermentation • Electronic Components, Photo & Audio Visual • Surface Technology, Cleaning Machines, Nuclear • Critical Liquid Process Applications With over 50 years of industry experience, Filtration Systems has a reputation as a market leader, manufacturing industrial liquid filter products of superior quality and design. Companies that invest in the refinement of their liquid filtration processes are rewarded with higher quality products, increased productivity and reduced labor costs. We are committed to satisfying our customer’s diverse needs with personal service and prompt delivery. Our vessels and filter media are specifically designed to work together as a system, maximizing efficiency. We have extensive experience in the areas of Process and Industrial Filtration, Microfiltration and Pre-filtration. Filtration Systems vessels and filter media are widely used throughout the world for liquid clarification and high-purity filtering applications.10304 N.W. 50th Street • Sunrise, FL 33351 USA Tel: 954-572-2700 • Fax: 954-572-3401 www.filtrationsystems.com ISO 9001:2015 Certified ©2023 Mechanical Manufacturing Corp. FS-IO-05/23Next >