< Previous18 Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media * Includes Buna-Gasket Seal STANDS, BRACKETS & ACCESSORIES FOR MINIATURE HOUSINGS 4" DIAMETER FILTER VESSELS (MODELS 141 & 151) MODELDESCRIPTION H-S/STAND-141Stainless Steel Stand for NS-141 H-C/STAND-141 Carbon Steel Stand for NC-141 H-S/STAND-151 Stainless Steel Stand for NS-151 H-C/STAND-151 Carbon Steel Stand for NC-151 H-S/BRACKETStainless Steel Bracket for Miniature Housings (141 or 151) H-C/BRACKETCarbon Steel Bracket for Miniature Housings (141 or 151) A-#4PB#4 Size Perforated Support Basket, T-316 S/S 9/64" diameter holes, staggered pattern wall; hemispherical bottomA-#5PB #5 Size Perforated Support Basket, T-316 S/S A-#4CB #4 Size Canister Basket with Liquid DiffuserHolds granular materials, such as activated carbon Solid wall; perforated, hemispherical bottom A-#5CB#5 Size Canister Basket with Liquid Diffuser A-#4PERF-MLB #4 Size Mesh or Micron Lined Basket, T-316 S/S * Mesh or Micron Choices: Mesh: 20, 30, 40, 50, 60, 70, 80, 100, 150, 200 (Industrial Service) Micron: 5, 10, 15, 25 (Light Duty, Specialty Use) Micron: 40, 90, 160, 250 (Industrial Service) A-#5PERF-MLB#5 Size Mesh or Micron Lined Basket, T-316 S/S * A-#4STRAINER#4 Heavy Duty Perforated Strainer Basket, T-304 S/S *Hole Size: 1/2" 3/8" 1/4" 3/16" 9/64" 3/32" 1/16" 3/64" Decimal: (.500) (.375) (.250) (.1875) (.1406) (.0938) (.0625) (.0469)A-#5STRAINER #5 Heavy Duty Perforated Strainer Basket, T-304 S/S * A-#4/5 BAGINSERT#4 or #5 Size Filter Bag Insert, T-316 S/SAllows for easy installation of filter bags A-#4CC#4 Cartridge Chamber, T-316 S/S (Holds One 10" Cartridge Filter) A-#5CC#5 Cartridge Chamber, T-316 S/S (Holds One 20" Cartridge Filter) O-CC-GASKET-B4Buna Gasket for Miniature Housing Cartridge Chambers (141 or 151) O-CC-GASKET-T4 Teflon® Gasket for Miniature Housing Cartridge Chambers ( 141 or 151)Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media 19 Ball Valves Filtration Systems Valved Filter Systems have two Stainless Steel Ball Valves installed on the Inlet and Outlet of each vessel allowing individual housings to be isolated for Media change-out. REPLACEMENT INLET/OUTLET BALL VALVES & PARTS MODELDESCRIPTION BALLVALVE- 2"2" Ball Valve, T-316 S/S, 3 piece, Full-Port with Teflon Seats & Gaskets BALLVALVE- 1-1/4" 1-1/4" Ball Valve, T-316 S/S, 3 piece, Full-Port with Teflon Seats & Gaskets REPAIR KIT- 2" Replacement Teflon Seats & Gaskets for Filtration Systems 2" Ball Valve REPAIR KIT- 1-1/4" Replacement Teflon Seats & Gaskets for Filtration Systems 1-1/4" Ball Valve VALVE HANDLE Replacement Valve Handle for Filtration Systems Ball Valves VALVE-LOCKOUTBall Valve Safety Lockout assembly, 2 per set REPLACEMENT HOUSING LIDS MODELDESCRIPTION S-LID Stainless Steel Replacement Lid for Filtration Systems ASME Code, 8" Diameter Housings, T-316 S/S; Hinge Pin Included C-LID Carbon Steel Replacement Lid for Filtration Systems ASME Code, 8" Diameter Housings; Hinge Pin included NS-LID Stainless Steel Replacement Lid for Filtration Systems Industrial Grade, 8" Diameter Housings, T-304 S/S; Hinge Pin included NC-LID Carbon Steel Replacement Lid for Filtration Systems Industrial Grade, 8" Diameter Housings; Hinge Pin included NS-LID 4 Stainless Steel Replacement Lid for Filtration Systems Industrial Grade, 4" Diameter Housings, T-316 S/S; Hinge Pin included NC-LID 4 Carbon Steel Replacement Lid for Filtration Systems Industrial Grade, 4" Diameter Housings; Hinge Pin included CARTRIDGE CHAMBERS & CHAMBER HARDWARE FOR 8" DIAMETER FILTER VESSELS (MODELS 112, 122 & 130) MODELDESCRIPTION A-10CC10" Cartridge Chamber & Hardware, T-316S/S * A-20CC20" Cartridge Chamber & Hardware, T-316S/S * A-30CC30" Cartridge Chamber & Hardware, T-316S/S * Replacement Hardware H-GUIDEPOST110" Guide Post, T-316 S/S ** H-GUIDEPOST2 20" Guide Post, T-316 S/S ** H-GUIDEPOST3 30" Guide Post, T-316 S/S ** H-BTMSEATCAPBottom Pedestal Seat ** H-SPRINGASSBLYSpring Assembly, Top Seat Cap & Spring ** O-BUNA-GASKETBuna-N Sealing Gasket (Standard) O-EPR-GASKETEthylene Propylene/EPDM Sealing Gasket O-NEO-GASKET Neoprene/Chloroprene Sealing Gasket O-SIL-GASKET Silicone Sealing Gasket O-VITON-GASKET Viton® Sealing Gasket O-AFLAS-GASKETAflas Sealing Gasket O-TEF-GASKETTeflon® Sealing Gasket * Includes Buna-Gasket Seal ** (4) required for each Cartridge Chamber Housing Lids To order a replacement Lid, please have the following information available (found on the Housing Nameplate): Serial Number Maximum Pressure Rating Maximum Temperature Rating Year of Manufacture Note: Lid Sealing Hardware and O-Rings are sold separately. Ball Valve with Safety Lockout Assembly Cartridge Chambers Insertion of the Chamber into any of our Filter Bag Housings converts the Vessel into a cartridge Housing, without modification of piping or change of liquid flow path. These removable, positive sealing Chambers hold four standard Cartridge Filters in a “Cluster of Four” arrangement. Cartridge Chambers are available in three sizes to hold standard 10", 20", and 30" length Cartridge Filters. Use one 20" Chamber for all Model 122 Housings, one 10" Chamber for all Model 112 Housings, or one 30" Chamber for all Model 130 Housings.20 Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media O-RINGS AND GASKETS MODELDESCRIPTION Lid O-Rings for Filtration Systems 8" Diameter Filter Vessels (112, 122, 110, 120, 130) O-BUNA Buna-N O-Rings, 2 per set (standard) O-EPR Ethylene Propylene/EPDM O-Rings, 2 per set O-NEOPRENENeoprene®/Chloroprene O-Rings, 2 per set O-SILICONESilicone O-Rings, 2 per set O-VITONViton O-Rings, 2 per set O-AFLASAflas® O-Rings, 2 per set O-TEFLONTeflon O-Rings (Solid White), 2 per set O-TEF/SILICONE Teflon Encapsulated/Silicone O-Rings, 2 per set O-TEF/VITON Teflon Encapsulated/Viton O-Rings, 2 per set Lid O-Rings for Filtration Systems 4" Diameter Filter Vessels (141 or 151) O-BUNA 141/151Buna-N O-Rings for Miniature Vessels, 2 per set (standard) O-EPR 141/151Ethylene Propylene/EPDM O-Rings for Miniature Vessels, 2 per set O-NEOP 141/151Neoprene/Chloroprene O-Rings for Miniature Vessels, 2 per set O-SIL 141/151Silicone O-Rings for Miniature Vessels, 2 per set O-VIT 141/151 Viton O-Rings for Miniature Vessels, 2 per set O-TEF 141/151 Teflon O-Rings (Solid White) for Miniature Vessels, 2 per set O-T/S 141/151 Teflon Encapsulated/Silicone O-Rings for Miniature Vessels, 2 per set O-T/V 141/151 Teflon Encapsulated/Viton O-Rings for Miniature Vessels, 2 per set Basket Flange Sealing Gasket for Filtration Systems #1 & #2 Size Specialty Baskets (112 or 122) (Strainer Baskets & Mesh/ Micron Lined Baskets) O-BUNA-GASKETBuna-N Sealing Gasket (standard) O-EPR-GASKETEthylene Propylene/EPDM Sealing Gasket O-NEO-GASKETNeoprene/Chloroprene Sealing Gasket O-SIL-GASKET Silicone Sealing Gasket O-VITON-GASKET Viton Sealing Gasket O-AFLAS-GASKET Aflas Sealing Gasket Basket Flange Sealing Gasket for Filtration Systems #4 & #5 Size Specialty Baskets (141 or 151) (Strainer Baskets & Mesh/ Micron Lined Baskets) O-BUNA-GASKET-4Buna-N Sealing Gasket (standard) for 141/151 Basket Flange O-TEF-GASKET-4Teflon Sealing Gasket for 141/151 Basket Flange WARNING Always check chemical and thermal compatibility of Housing Material, O-Rings, Gaskets, Valves, Gauges, Flanges, Plugs and Filter Media with the fluid being filtered. Consult a liquid compatibility guide. Fluid compatibility includes all materials in contact with the liquid under elevated pressures and temperatures.Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media 21 FILTER MEDIA ACCUFIT® WELDED EXPANDED MEDIA FILTER BAGS A unique filter product, designed for demanding, high purity liquid filtration applications has been developed offering superb flow, robust solids loading, minimal differential pressure and precise micron retention—all essential requirements for maximizing results… Specifically manufactured for high solids loading and strength; excellent for high purity chemical and water, pharmaceutical, food, edible or high purity synthetic oils, bio-fuels and cosmetic use; superb quality filtering incorporates convenience, cleanliness and productivity. These filters are available in quad, six, eight, ten-wall, or more laminated plies, are non-fiber shedding and can handle elevated temperatures (in 100% Nylon or Polypropylene). Graded-density and/or redundant layers of FDA compliant monofilament are ultrasonically laminated and formed, and use a non-bypassing sealing collar with removal handles. Accufit Welded Expanded Media is designed in accordance with the ISO 4406:1999 standard. The filter media loads on the surface of the filter, trapping particles in its many tortuous grid paths. Useful for high-flow and strength, without significant increased differential pressure imposed from the filter. It is the opposite of a depth filter—one that loads particulate on the surface of the filtering layers—not in them. As such, when finished, it will hold large amounts of solids—and still drain liquid, as it is highly porous. One of the unique features of this filter is that it may be “tweaked” as necessary to accommodate a wide array of liquid filtering conditions—e.g. greater throughput, tighter micron retention, etc… Available Sizes: P2 Size = 7" Dia. x 32" LongP4 Size = 4" Dia. x 14" Long P1 Size = 7" Dia. x 16" LongP5 Size = 4" Dia. x 24" Long Order in multiples of 50 pieces (minimum). Please order carefully, as filter bags are not returnable. EXPANDED MEDIA MODEL NUMBER CODING SYSTEM EXAMPLESFILTRATION RANGE (m) NMO-40-QW-P240 m – 14 m NMO-40-EW-P240 m – 4 m NMO-40-XW-P240 m – 2 m NMO-40-XII-P240 m – 1 m PMO-100-QW-P2 100 m – 37 m PMO-100-SW-P2 100 m – 19 m PMO-100-EW-P2 100 m – 10 m PMO-100-XW-P2100 m – 5 m MICRON RATINGS ACHIEVED FROM CONFIGURATION OF LAMINATED LAYERS MATERIAL MICRON RATING NUMBER OF PLIES DW 2 TW 3 QW 45 SW 67 EW 89 XW 1011 XII 12 XIV 14 4028.8 20.7 14.9 10.77.75.64.02.92.11.51.10.6 6546.8 33.7 24.3 17.5 12.69.16.54.73.42.41.80.9 10072.0 51.8 37.3 26.9 19.3 13.9 10.07.25.23.72.71.4 150 108 77.8 56.0 40.3 29.0 20.9 15.0 10.87.85.64.02.1 200 144104 74.6 53.7 38.7 27.9 20.1 14.4 10.47.55.42.8 400 288207149107 77.4 55.7 40.1 28.9 20.8 15.0 10.85.6 600432311224161116 83.6 60.2 43.3 31.2 22.5 16.28.4 800576415299215155111 80.2 57.8 41.6 30.0 21.6 11.222 Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media ACCUFIT® WELDED - IP LIQUID FILTER BAGS IP Series - Integrated Polymeric Support® Polypropylene Felt Liquid Filter Bags Accufit Welded IP Series- Integrated Polymeric Support® Materials of Construction - 100% Polypropylene: Needle Felt Filter Media Polypropylene Support Layer Non Woven Spun Bond Jacket Zero-Bypass® Collar • Nominally rated solids retention • Each Bag individually wrapped for cleanliness • Sustains temperatures up to 180˚F The IP Jacket contains a structural layer which is ultrasonically laminated to the exterior of the polypropylene needled felt, to enhance its strength. Compared to standard felt filter bags, under similar field conditions, the IP Support Jacket results in: • Increased Flow Rates by 40% • Longer Run Times • Enhanced Solids Loading • Sustains 50% greater differential pressure before change-out is required • Elimination of fiber migration downstream Accufit Welded- IP Series Liquid Filter Bags Feature: High-density, polypropylene needled felt filter medium. A structural layer of polypropylene ultrasonically laminated and affixed to the exterior of the felt, allowing the filter bag to sustain significantly greater differential pressure before change-out is required, without increased initial pressure drop. As a result, longer run times allow enhanced solids loading. A non-woven jacket to eliminate fiber migration downstream, allowing the use of polypropylene felt in a broader range of liquid applications. This layer includes a finished edge on the longitudinal weld of the bag. P2 SIZE: 7" Dia. x 32" L MODELDESCRIPTION P-001-P2-IP1 Micron, Size #2-IP P-005-P2- IP 5 Micron, Size #2-IP P-010-P2-IP 10 Micron, Size #2- IP P-025-P2-IP25 Micron, Size #2-IP P-050-P2- IP 50 Micron, Size #2-IP P-100-P2-IP 100 Micron, Size #2- IP P-200-P2-IP200 Micron, Size #2-IP P1 SIZE: 7" Dia. x 16" L MODELDESCRIPTION P-001-P1-IP1 Micron, Size #1-IP P-005-P1- IP 5 Micron, Size #1-IP P-010-P1-IP 10 Micron, Size #1- IP P-025-P1-IP25 Micron, Size #1-IP P-050-P1- IP 50 Micron, Size #1-IP P-100-P1-IP 100 Micron, Size #1- IP P-200-P1-IP200 Micron, Size #1-IP P4 SIZE: 4" Dia. x 14" L MODELDESCRIPTION P-001-P4-IP1 Micron, Size #4-IP P-005-P4- IP 5 Micron, Size #4-IP P-010-P4-IP 10 Micron, Size #4- IP P-025-P4-IP25 Micron, Size #4-IP P-050-P4- IP 50 Micron, Size #4-IP P-100-P4-IP100 Micron, Size #4-IP P-200-P4-IP200 Micron, Size #4-IP P5 SIZE: 4" Dia. x 24" L MODELDESCRIPTION P-001-P5-IP1 Micron, Size #5-IP P-005-P5- IP 5 Micron, Size #5-IP P-010-P5-IP 10 Micron, Size #5- IP P-025-P5-IP25 Micron, Size #5-IP P-050-P5- IP 50 Micron, Size #5-IP P-100-P5-IP 100 Micron, Size #5- IP P-200-P5-IP200 Micron, Size #5-IP Order in multiples of 50 pieces (minimum). Please order carefully, as filter bags are not returnable. Product Highlights •Fully welded Construction Ultrasonically welded seams prevent solids, larger than the micron rating of the media, from bypassing the filter bag. Conventional filter bags are sewn, allowing particles to bypass through the needle holes of seams. •Zero-Bypass Bag Collar The Zero-Bypass Collar provides an optimum compression seal, when used in a Filtration Systems filter vessel. When the filter bag is under elevated pressure, the flanged bag collar prevents bypass of unfiltered liquid. • Elevated Filter Bag Handles A dual handle lift-out, located above the liquid level, eliminates contact with dirt and unfiltered materials and allows quick filter bag removal for replacement. LAYER 1 LAYER 2 LAYER 3 DIRECTION OF LIQUID FLOWFiltration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media 23 ACCUFIT® WELDED SUPERBOND® LIQUID FILTER BAGS Multi-layer, laminated filter bags provide superior particle removal efficiencies for a broad range of industrial filtration applications…. ELC® - ENGINEERED LAMINATED COMPOSITE ~ CLEAN, UNIFORM and STABLE ~ ~DESIGNED FOR CONSISTENT AND PREDICTABLE RESULTS~ AVAILABLE IN 100% FDA COMPLIANT POLYPROPYLENE or NYLON Features • Accufit Welded SuperBond is designed as the superior alternative to commodity-grade, felt filter bags. • Designed to provide predictable performance results with 90% efficiency ratings. • Ultrasonically Welded, Composite Layer Design for increased surface area and precise particle retention. • No stitching holes like those found in other, sewn liquid filters. • Longer lasting with significantly improved efficiencies over and above felt filter bags. • IP Series - Integrated Polymeric Support structural layer for enhanced strength and support. Prevents fiber migration downstream. • Zero-Bypass Compression Collar prevents bypass and sealing issues. Specifications • Manufactured using Multi-Layer, Thermally Bonded Continuous Filament Depth Media in Polypropylene or Nylon. • 100% FDA compliant materials, according to CFR Title 21. Silicone free. • IP - Integrated Polymeric Support® support layer; non-fiber-shedding. • Suggested maximum differential pressure: 35 psi / 2.4 bar • Maximum operating temperature: Polypropylene 180°F / 82°C, Nylon 340°F / 171°C • Suggested maximum flow rate: 90 gpm (water, P2 size) • Available in standard industry sizes: P1 (7"dia x 16"L), P2 (7"dia x 32"L), P3 (4"dia x 9"L), P4 (4"dia x 14"L), P5 (4"dia x 24"L) • Available micron ratings: 1, 5, 10, 25, 50, 100 Model Number Coding SB-Pxxx-P2- IP (xxx = micron rating) 100% FDA POLYPROPYLENE COMPONENTS SB-Nxxx-P2- IP (xxx = micron rating) 100% FDA NYLON (N6) COMPONENTS24 Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media ULTRAFIT® WELDED High Performance Liquid Filter Bags Absolute Rated, Graded-Density, Composite Layer Design Technology™ Order in multiples of 20 pieces (minimum). Please order carefully, as filter bags are not returnable. Ultrafit Welded 500 For applications demanding both high loading and efficiency, the Ultrafit Welded 500 Filter Bag has the unique ability to effectively filter liquids where particles vary in both size and distribution. The Ultrafit 500 Filter Bag consists of graded-density layers of melt-blown polypropylene, serving as a primary upstream filter. Separately jacketed, this pre-filter collects larger particles, preventing them from prematurely blinding the media below. As fluid progression continues downstream, redundant layers of absolute-rated microfiber capture finer particles, assuring filtration efficiency levels of at least 99% at the micron ratings available. Ultrafit Welded 100 The Ultrafit Welded 100 liquid Filter Bag is ideally suited for batch or smaller applications, or as a final filter where the range of particle size is narrower and more consistent. This product is designed to provide highly efficient liquid filtration for applications requiring consistent levels of purity. The Ultrafit 100 filtering membrane is constructed of FDA compliant, melt-blown polypropylene microfiber. The use of absolute-rated material achieves 97% filtration efficiency at the micron ratings available. Additional layers of non-woven spunbond are used to jacket the filtering membrane, providing support to the product and minimizing fiber migration downstream. The result is a superior product at an economical price. Ultrafit Welded 500-EXP The Ultrafit 500- EXP filter bag consists of multiple layers of the same micron rating for applications requiring sub-micron filtration. Exponential layers improve capture rates and ensure filtration efficiency levels of at least 99% at the micron ratings available. IP - Integrated Polymeric Support IP is a structural layer of ultrasonically laminated to the internal composite of the Ultrafit Welded Liquid Filter Bag. Integrated Polymeric Support allows the filter bag to sustain significant differential pressure before change-out is required, without increasing initial pressure drop. Longer run times allow enhanced solids loading. Integrated Polymeric Support is a standard feature of the Ultrafit Welded 100, 500, 500 EXP, 800 and Nylon Series filter bags. NOTICE Filtration occurs by capturing particles throughout the depth of the media. As a result, single-use filter media is disposable and cannot be washed or reused. ULTRAFIT 500 MODELDESCRIPTION 500-P000-P2-EXP <1- 0.5 Micron, Size #2 500-P001-P2-IP 1 Micron, Size #2- IP 500-P002-P2-IP 2 Micron, Size #2- IP 500-P005-P2- IP 5 Micron, Size #2-IP 500-P010-P2-IP 10 Micron, Size #2- IP 500-P025-P2-IP 25 Micron, Size #2- IP 500-P050-P2- IP 50 Micron, Size #2-IP ULTRAFIT 100 MODELDESCRIPTION 100-P001-P2-IP 1 Micron, Size #2- IP 100-P002-P2- IP 2 Micron, Size #2-IP 100-P005-P2-IP 5 Micron, Size #2-IP 100-P010-P2-IP 10 Micron, Size #2- IP 100-P025-P2-IP25 Micron, Size #2-IP 100-P050-P2- IP 50 Micron, Size #2-IP 100-P100-P2-IP 100 Micron, Size #2- IP 100-P200-P2-IP 200 Micron, Size #2-IP Available Sizes: P2 Size = 7" Dia. x 32" Long P1 Size = 7" Dia. x 16" Long Available Sizes: P2 Size = 7" Dia. x 32" LongP4 Size = 4” Dia. x 14" Long P1 Size = 7" Dia. x 16" LongP5 Size = 4" Dia. x 24" LongUltrafit Welded 800 Ideal for high-purity and critical liquid process applications, Ultrafit Welded 800 Filter Bags achieve 99.98% efficiency (beta 5000), at ratings less than 1 micron. Filter Bags are individually wrapped for cleanliness, and packaged 20 pieces per case. Product Applications • Micro-filtration for Industrial and Process Liquids • Pharmaceutical, Biological, Electronic and Nuclear Applications • Pre-filtration for Reverse Osmosis Membranes and Expensive Cartridges • Filtration of Surface Water and Groundwater • Recycling of Wastewater and Reclaimed Water Product Features • Absolute Rated Performance… 99.98% efficient, down to 0.2 micron • 100% FDA Compliant Polypropylene Materials • Graded-Density, Composite Layer Design… allows enhanced solids loading • Fully Welded Ultrasonic Construction… eliminates solids bypass • Integrated Polymeric Support… provides superior mechanical strength • Zero-Bypass Collar… assures an optimum compression seal ULTRAFIT 800, SUB-MICRON RATED MODELDESCRIPTIONMODELDESCRIPTION 800-P02-P2-EXP 0.2 Micron, Size #2 800-P02-P1-EXP 0.2 Micron, Size #1 800-P04-P2-IP0.4 Micron, Size #2800-P04-P1-IP0.4 Micron, Size #1 800-P06-P2- IP 0.6 Micron, Size #2800-P06-P1- IP 0.6 Micron, Size #1 800-P08-P2-IP0.8 Micron, Size #2800-P08-P1-IP0.8 Micron, Size #1 Ultrafit Nylon Product Features • Thermally and Chemically compatible with a broad range of applications where Polypropylene is not suitable • Suitable for Sanitization, Autoclaving or in-Situ Steam Sterilization • 100% FDA Compliant Nylon Materials • No mildew or bacterial effects • Abrasion resistant • Efficiency Ratings of at least 99.9% (beta 1000) at the micron ratings available. • Ideal for high temperature applications, up to 340°F • Melt-Blown Nylon 6 Microfiber Filtering Membrane • Long-Strand, thermally bonded continuous filament support layers • IP - Integrated Polymeric Support • Zero-Bypass Collar: Nylon, 7.125" OD ULTRAFIT NYLON MODELDESCRIPTIONMODELDESCRIPTION 500-N07-P2-EXP< 1 Micron, Size #2500-N07-P1-EXP< 1 Micron, Size #1 500-N001-P2-IP1 Micron, Size #2500-N001-P1-IP1 Micron, Size #1 500-N005-P2-IP5 Micron, Size #2500-N005-P1-IP5 Micron, Size #1 500-N010-P2- IP 10 Micron, Size #2500-N010-P1- IP 10 Micron, Size #1 500-N025-P2-IP25 Micron, Size #2500-N025-P1-IP25 Micron, Size #1 500-N050-P2-IP50 Micron, Size #2500-N050-P1-IP50 Micron, Size #1 Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media 25 Order in multiples of 20 pieces (minimum). Please order carefully, as filter bags are not returnable. Order in multiples of 20 pieces (minimum). Please order carefully, as filter bags are not returnable.26 Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media ULTRAFIT WELDED – AMT™ SERIES Antimicrobial Technology (AMT) High Performance Liquid Filter Bags Standard Features and Materials of Construction • Multi-Layer, High Performance Liquid Filter Bag • Graded Density, Composite Layer Design Technology™ • Antimicrobial Agent incorporated into the final filtering layers of the Bag • 99.98% efficiency ratings (beta 5000) • Materials of construction: 100% FDA Compliant Polypropylene • Single-use, disposable Filter Bag Benefits of Antimicrobial Technology • Antimicrobial agent inhibits the growth of broad spectrum bacteria, fungi, protozoa and yeast on the treated layers • Antimicrobial agent lasts the life of the filter • Non-Toxic and insoluble in water What are some uses for Ultrafit welded-AMT Series High Performance Filter Bags? When properly installed in a Filtration Systems Over-The-Top design housing, Ultrafit Welded-AMT Series filter bags are useful in filtering many types of liquids, including water, transformer cooling oil, synthetic oil, lubricants, paints and other water-based liquids, when prevention of fluid contamination during the filtering process is important to the final product. Why is Antimicrobial Protection important for my filtering process? Microorganisms can contaminate liquids causing spoilage, odor, degradation and reduced shelf life of products. Other effects of contamination may include changes in viscosity or pH, discoloration, gassing during processing or swelling of finished product containers. During the filtering process the formation of biofilms may inhibit liquid flow, contaminate or corrode process piping and affect heat exchange. How does Antimicrobial Technology work? Antimicrobial additives disrupt the metabolic function of thin walled, aerobic and anaerobic microorganisms, inhibiting their ability to function, grow and reproduce on the filter media. How is the Antimicrobial agent built into the media? The antimicrobial agent is incorporated into the polymeric voids of the polypropylene fiber, without affecting the physical properties of the fiber. The submicron-sized particles migrate to the surface of the fiber, where they become an integral part of the microfiber. Since it is part of the fiber, not a surface coating, it will not wash or wear out. The antimicrobial agent is insoluble in water and lasts the life of the filter. Is it safe? Antimicrobial agents only attack thin-walled cells. Human and animal cells are thick-walled, and are therefore impermeable to the antibacterial additive. The antimicrobial agent, Triclosan (Chlorinated Phenoxy Compound), is registered with the EPA as a safe, non-toxic product. CAUTION The Ultrafit Welded- AMT Filter Bag does not protect users or others against food-borne (or disease causing) bacteria. Mechanical Manufacturing Corporation, Filtration Systems Division is not making any health claims for this product. P2 SIZE: 7" Dia. x 32" L MODELDESCRIPTION AMT-P04-P2-IP 0.4 Micron, Size #2 AMT-P06-P2-IP 0.6 Micron, Size #2 AMT-P08-P2- IP 0.8 Micron, Size #2 AMT-P001-P2-IP1 Micron, Size #2 AMT-P003-P2-IP3 Micron, Size #2 AMT-P005-P2- IP 5 Micron, Size #2 P1 SIZE: 7" Dia. x 16" L MODELDESCRIPTION AMT-P04-P1-IP 0.4 Micron, Size #1 AMT-P06-P1-IP 0.6 Micron, Size #1 AMT-P08-P1- IP 0.8 Micron, Size #1 AMT-P001-P1-IP1 Micron, Size #1 AMT-P003-P1-IP3 Micron, Size #1 AMT-P005-P1- IP 5 Micron, Size #1 Available Sizes: P2 Size = 7" Dia. x 32" Long P1 Size = 7" Dia. x 16" Long Order in multiples of 20 pieces (minimum). Please order carefully, as filter bags are not returnable.Filtration Systems | Installation, Operating and Safety Manual for Liquid Filter Housings and Filter Media 27 APX® HIGH-CAPACITY ELEMENT Large Diameter, Drop-In Cartridge Filter Element Advanced filter technology specifically designed for Over-The-Top Vessel Systems Features • Inside to outside flow configuration allows the finest particle retention to have the greatest allocation of surface area • Graded-design, controlled porosity depth media for precise particle retention and consistent performance • Deep-pleated design and structurally reinforced upstream/downstream for product stability • Long cycle times and enhanced life make them more economical than using standard cartridge filters • Greater surface area due to larger physical size compared to other competitive products, providing lower cost-per-gallon to filter • Retrofits most standard #2, #4 & #5 size filter housings, avoiding the capital expense of new equipment • Easy to use drop-in design requires no support basket for use, further reducing pressure buildup • Filtered solids are contained within the element, so removal of the cartridge fully eliminates vessel cleaning Specifications • Available in three sizes: APX-728: 7"Dia. x 28"L APX-412: 4"Dia. x 12"L APX-422: 4"Dia. x 22"L • Materials of Construction: 100% Polypropylene • All materials are FDA listed for food contact in Title 21 of U.S. Code of Federal Regulations • Absolute-rated efficiency of 99% available in seven-micron ratings: 0.5, 1, 5, 10, 25, 50 and 100. (ASTM F 795 Test) • Maximum Flow Rate (water) APX-728: 90gpm APX-412: 20gpm APX-422: 30gpm • Maximum Operating Temperature 176°F/80°C • Maximum Recommended Change-out Differential 35 psid • Maximum Differential Pressure of the APX element 50 psid at 68°F and 45 psid at 120°F • PurSeal® flange provides hydrostatic compression seal when used in our Over-The-Top design housings, eliminating bypass of unfiltered liquid downstream • EPR/EPDM standard gasket material Easy to use drop-in design requires no support basket. APX Filter Element combines large surface area and high flow rate to provide massive solids loading with longer run times in a unique, oversized drop-in design.Next >