Accufit^® Welded Liquid Filter Bags

Three Distinct Design Advantages:
•	Completely welded construction prevents solids, larger than the micron rating of the media, from bypassing the filter bag. (Conventional bags are sewn, allowing particles to bypass through the needle holes of seams.)
•	The Zero-Bypass collar provides an optimum compression seal, when used in a Filtration Systems filter vessel. When the filter bag is under elevated pressure, the flanged bag collar prevents bypass of unfiltered liquid.
•	A dual handle lift-out, located above the liquid level, eliminates contact with unfiltered material, allowing quick filter bag removal for replacement.
•	Available in Size 1, 2, 4 & 5

FEATURES AND BENEFITS

100% POLYPROPYLENE
   Broad range of chemical compatibility
NO SEWN SEAMS
   No bypass of unfiltered fluid
FLANGED BAG COLLAR WITH INTEGRAL GASKET
   No bypass around filter bag seal
DUAL HANDLES
   Quick and easy filter bag removal eliminates contact with dirt or unfiltered material
SURFACE TREATED EXTERIOR
   Minimizes fiber migration downstream
FULLY COMBUSTIBLE
   Total incineration at low temperatures reduces disposal costs
HIGH STRENGTH
   Minimizes bag breakage reducing product failures
LOW PRESSURE DROP
   Low resistance to flow means greater yield per filter bag
BAG IDENTIFICATION
   Micron rating and filter bag size permanently embossed, eliminates incorrect replacement
ECONOMICAL
   Low cost, high performance liquid filtration

Accufit Welded – IP Series
Integrated Polymeric Support^TM
An enhancement to the Accufit Welded Filter Bag series, the addition of a structural layer, ultrasonically laminated to the internal composite of the bag allows significantly greater differential pressure before change-out is required. A non-woven, polypropylene spun bond jacket eliminates fiber migration downstream. The filter bag is finished with an inverted bottom and a finished edge on the longitudinal weld.